Mobotix D24M - Installing the Vandalism Set; Mounting Instructions




www.mobotix.com • sales@mobotix.com
 
 
The Vandalism Set provides additional security and protection for D24M cameras with little
The Vandalism Set provides additional security and protection for D24M cameras with little
eort and at a low cost. It is ideally suited for use under particularly demanding conditions
eort and at a low cost. It is ideally suited for use under particularly demanding conditions
(such as prisons, trouble areas, train stations, etc.). The set consists of a robust stainless
(such as prisons, trouble areas, train stations, etc.). The set consists of a robust stainless
steel outer shell that is available in five dierent colors and a reinforced plastic dome.
steel outer shell that is available in five dierent colors and a reinforced plastic dome.
To install the Vandalism Set, replace the standard plastic outer shell supplied with the
To install the Vandalism Set, replace the standard plastic outer shell supplied with the
D24M IT/Secure with the stainless steel outer shell of the Vandalism Set (including the
D24M IT/Secure with the stainless steel outer shell of the Vandalism Set (including the
safety screws and four mounted spacers). In addition, replace the original dome of the
safety screws and four mounted spacers). In addition, replace the original dome of the
D24M IT/Secure with the reinforced dome of the Vandalism Set.
D24M IT/Secure with the reinforced dome of the Vandalism Set.