www.mobotix.com • sales@mobotix.com
(MX-OPT-IC)
For simple installation in false ceiling tiles.
Suitable for discreet surveillance. Optionally
available with a stainless steel ring.
(MX-OPT-WH)
Consists of Outdoor Wall Mount and mounting
supplies. Covers RJ45 flush-mounted sockets.
Space for expansion modules (battery, UMTS,
WLAN, etc.). Easily mounted to poles using
Pole Mount. Weatherproof IP65.
(MX-OPT-MH)
Flange for Outdoor Wall Mount. Can be
mounted to wall corners or poles. 3 mm
stainless steel, white. Wall Mount may be
ordered separately or as a set.
Tinted Dome (MX-D24M-OPT-DCS)
Suitable for especially bright environments (e.g.
under direct sunlight). A tinted dome reduces
the glare from sunlight by 50% compared
(MX-NPA-PoE-Set*)
The Network Power Adapter Set is used to
remotely power the MOBOTIX D24M over
a network cable. This makes it possible to
use the network cable to both connect the
camera and remotely supply power (up to
100m). The MOBOTIX Network Power Adapter
Set including a power supply with RJ45 con-
nector is required if you are not using a PoE-
compatible switch or router to supply power
Also suitable for
mounting to drywall
* Country-specic ver-
sions of the set are
available from MOBOTIX
To Next Page
Loading...
