Example for a Text
Operator Panel
16
05/01 AWB27-1302-GB
With this program you can test the functions of actual
value display and setpoint value input. You will not
be able to test alarm messages until the MI4 project
is expanded (see Expanding the Project).
왘 After a successful syntax check, switch to
Generate Code and create a new make file.
왘 Under Generate
➞
Program Parameters
➞
Compiler enter the active marker range (0 to 100,
for example)
왘 Select Generate
➞
Generate All
Once the program code hase been generated you
can transfer the program to the PLC under Test and
Commissioning.
To Next Page
Loading...
