Defining message texts
49
05/01 AWB27-1302-GB
In the above illustration graphic symbols are already
shown for both states.
왘 Close the open definition masks by clicking on
OK.
A monochrome rectangle will appear in the display
field as a placeholder for the graphic.
왘 Draw a border around this placeholder and save
your project.
Defining message texts Message texts are dynamic texts which are
displayed in a defined display area and depend on
marker bit states of the PLC.
왘 Set double font size via ‹ Project
➞
Select Font...›
or by clicking on the Select Font icon.
To Next Page
Loading...
