Example for Touch
Operator Panel
50
05/01 AWB27-1302-GB
왘 Position the cursor in the display field and select
‹ Edit
➞
Data Field Type
➞
Message› or click on
the Message Text icon,
Message text field
The definition mask for message texts will appear.
왘 Enter the parameters for the message text as
shown in the following diagram:
왘 Click on the “Edit messages” button to assign a
message text to the 16 states of the memory byte
MB 0. Enter the text you wish for message text
numbers 0 to 15.
To Next Page
Loading...
