Defining dynamic graphics
47
05/01 AWB27-1302-GB
왘 Set font and font size by clicking on the Select
Font button.
왘 Confirm your entries with OK.
왘 In the Reference register enter the marker 1.0 for
button reference and light reference. Feedback
occurs directly in the button.
왘 Confirm your inputs with OK.
A labelled touch cell will appear on the display field.
You can test the function later in conjunction with the
PLC.
Defining dynamic
graphics
A dynamic graphic changes its appearance in
relation to the state of a defined value. In this way,
switching states and sequences can be represented
visually.
왘 Drag open a new frame the size of the required
graphic with the mouse.
왘 Select ‹ Graphics
➞
Dynamic Graphics› or click
on the Dynamic Graphics icon.
To Next Page
Loading...
