Defining a touch cell with
macro function
31
05/01 AWB27-1302-GB
Time and date in the MI4 can be set via the TIME
menu. To do so
왘 Press the Enter key for three seconds
왘 Select the TIME menu and confirm with the Enter
key. The date and time can be changed on the
display via the cursor control keys.
End input
Save the current level of configuration under a new
project name.
왘 Select ‹ File
➞
Save As ...› and enter the file name
TOUCH.PRJ. Confirm this by clicking on OK.
The project name, TOUCH.PRJ, is displayed on the
title bar of the configurator.
Defining a touch cell
with macro function
For entering setpoint values a numeric keypad is
called up via the touch cell.
왘 Via ‹ Project
➞
Select Font...› or with the Select
Font icon, reset the font size to Regular.
왘 Click on Show Toolbox under the Touchscreen
menu point. The Touch Toolbox will be displayed.
왘 Select the Generic Command Button in the Touch
Toolbox.
To Next Page
Loading...
