3
05/01 AWB27-1302-GB
1 Introduction
This brief introduction will show you, in the form of
two examples, how you can set up your panel with
the aid of the MI4 configuration software. Working
through the examples step by step is an excellent
way of familiarizing yourself with the program.
The MI4 range consists of Text Operator Panels,
Graphic Operator Panels and Touch Panels with the
MI4 configuration software (“MI4-CFG-1”) you can
configure all of the panels in the MI4 series to your
specifications.
The first practice example uses a Text Operator
Panel for configuration, the second example uses a
Touch Panel. In both of these examples the projects
are configured and transferred to the MI4 in question.
If you have a PLC connected you can test the
projects afterwards via the PLC connection. A basic
knowledge of Sucosoft S40 is a prerequisite.You will
in this way learn how a project is structured and how
to work with the MI4 configuration software.
The menu bar of the MI4 Configurator will adapt itself
to the particular MI4 panel selected. Menu items that
are not required are not displayed.
To Next Page
Loading...
