Engineering
14
12/03 AWB-C27-1293GB
Suconet K protocol
Precondition: To operate MI4 units with Suconet K,
the ZB4-501-IF1 interface module must be
connected. The following MI4 units are delivered in
that state:
For all other devices, the Suconet K interface module
must be ordered and fitted separately (see
Section “Interface module”, page 30).
The connection to a PLC with the Suconet K protocol
is made through the AUX PORT of the MI4. The AUX
PORT supports RS 485 communication.
MI4-101-KC1 MI4-151-KF1 MI4-161-TC1
MI4-101-KE1 MI4-451-KF1 MI4-471-TC1
MI4-111-KE1 MI4-151-TA1
MI4-131-KH1 MI4-451-TA1
To Next Page
Loading...
