Moeller MI4 - Connect MI4 (hand-held) to PLC; Connecting the MI4 (hand-held) to PC or printer (through CN2)

Engineering
22
12/03 AWB-C27-1293GB
PLC PORT
On the following units, connect the PC to the PLC
PORT:
MI4-100-KC1, MI4-101-KC1, MI4-110-KC1,
MI4-110-KD1
MI4-100-KE1, MI4-101-KE1
MI4-110-KG1, MI4-130-TA1
Use the ZB4-24A-KP1 standard cable to connect the
PC. The required adapter is supplied as standard
with the cable.
Figure 10: MI4 – PC connection with adapter
햲 Connection to the data plug housing
QPlug qSocket
3
2
2
MI 4
PC
3
5
10
11
햲
햲
3
2
5
8
7
ZB 4-24A-KP1
11
10
5
GND
RTS
CTS
RS 232
RxD
TxD
1
SUB D
15
Adapter
PLC PORT