8
3
Operation
Revision 3
© Moffat Ltd, September 2009
E32SUBC OVEN and PROOFER
Service Settings (refer 3.3.5 / 3.3.6 / 3.3.7)
Temperature Offset Setting range Default Setting
Temp offset oven probe +/-11 -1
Temp offset prover air probe +/-11 +4
Temp offset prover water probe +/-11 +2
Diagnostic
Oven probe temp displays current probe reading
Proofer probe air temp displays current probe reading
Proofer probe water temp displays current probe reading
Door switch Open/Close displays door switch status
Float switch Open/Close displays water tank float switch status
Humidity probe reading displays current probe humidity reading
Oven heat relay output status displays ON or OFF status
Oven power ON relay output status displays ON or OFF status
Proofer heat relay output status displays ON or OFF status
Proofer water heater relay output status displays ON or OFF status
Proofer power ON relay output status displays ON or OFF status
Oven fan relay output status displays ON or OFF status
Counters
Relay cycles - oven heater
Relay cycles - proofer air heater
Relay cycles - proofer water heater
Error counter - oven probe
Error counter - oven hi temp
Error counter - proofer air probe
Error counter - proofer air hi temp
Error counter - humidity sensor
Error counter - proofer water probe
Error counter - proofer water hi temp
Error counter - proofer water low