Hardware Reference Guide SST-DN4-PCU
C
Loading Firmware
Appendix Sections:
• Loading Firmware
Note
This appendix describes how to load the card manually, or how to write
your own loader. If you are using a Windows loader provided by
Woodhead Software & Electronics, the following instructions are not
required.
Loading Firmware 49
©2009 Molex Inc.Automation & Electrical Products, Integrated Products Division
Document Edition: 1.0, Document #: 715-0101, Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.