SST-DN4-PCU Hardware Reference Guide
3.1 Introduction
This section provides technical hardware information. The following information is intended for
programmers familiar with hardware-level PC programming.
3.2 Card Configuration Space
This section provides card configuration details for the card.
28 Hardware Register Details
©2009 Molex Inc.Automation & Electrical Products, Integrated Products Division
Document Edition: 1.0, Document #: 715-0101, Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
Note
Refer to the PCI specification and your particular OS documentation for
the function of all other PCI configuration space registers and their
typical uses.
Note
Typically, the PCI configuration space registers do not need to be
written to by the host system driver. A Plug & Play BIOS and/or host
operating system will ensure there are no resource conflicts in the
system.
To Next Page
Loading...