PC SOFTWARE – MONI LOG® ANALYZER EnDaL smart
- 44 -
Configuration of the measurement parameters
The configuration area will only be visible, when a device is connected that you can configure.
When viewing data sets from files, this window is not displayed (Figure 34).
Figure 34: Measurement data configuration area EnDaL smart
1) Synchronous interval: Time between the synchronous recording of
measurement data (temperature, humidity, pressure,
inclination and GPS)
2) Text field: Text that is saved in the device concerning the
transport (e.g. order number, destination, client,
supplier, owner)
3) Configuration for shock measurement
4) Configuration for alarm events
5) Transferring the configuration: Sends all currently made settings
to the sensor module
6) Deleting the memory: Deletes all data in the memory of the sensor module
7) Configure password: Enables the modification, the configuration and the
resetting of the device password, as well as a
shutdown of the device via software
To Next Page
Loading...