1. Brief description
1
1. Brief description
The panel meter M2-11 is a 5-digit device for direct current/direct voltage signals and a visual
threshold value monitoring via the display. The configuration happens via four front keys or
via the optional PC software PM-TOOL. An integrated programming interlock prevents
unrequested changes of the parameters and can be unlocked again by an individual code.
Optional the following functions are available: a supply for the sensor, a digital input for
triggering of Hold (Tara) or an analog output for further processing in the equipment.
By use of the two optional galvanic isolated setpoints, free adjustable threshold values can
be controlled and reported to a superior master display.
The electrical connection is carried out on the back side via plug-in terminals.
Selectable functions like e.g. the request of the min/max-value, an average determination of
the measuring signals, a nominal preset respectively setpoint preset, a direct change of
threshold value in operation mode and additional measuring supporting points for
linearisation complete the modern device concept.
To Next Page
Loading...
