12
5. Setting up the device
Menu level Parameterisation level
5.3. Programming interlock
Activation / Deactivation of the programming interlock or completion of the
standard parameterisation with change into menu group level (complete
function volume),
Default:
Choose between the deactivated key lock (works setting), the activated key
lock , or the menu group level with the navigation keys [▲] [▼]. Confirm
the selection with [P]. After this, the display confirms the settings with " ", and
automatically switches to operating mode. If was selected, the keyboard is
locked. To get back into the menu level, press [P] for 3 seconds in operating
mode. Now enter the (works setting ) that appears using [▲] [▼] plus [P]
to unlock the keyboard. appears if the input is wrong.
To parameterise further functions, needs to be set. The device confirms this
setting with „ „ and changes automatically into operation mode. By pressing
[P] for approx. 3 seconds in operation mode, the first menu group is shown in
the display and thus confirms the change into the extended parameterisation. It
stays as long activated as is entered in menu group , thus the display is
set back in standard parameterisation again.
5.4. Extended parameterisation (Professional operation level)
5.4.1. Signal input parameters
Menu level
Parameterisation level
Selection of the input signal,
Default:
There are several measuring input options: 0-20 mA, 4-20 mA or 0-10 VDC
signals as works calibration (without application of the sensor signal) and
(voltage) or (current) as sensor calibration (with the sensor applied). Confirm
the selection with [P] and the display switches back to menu level.
Menu group level
Menu level
To Next Page
Loading...