05/06
•
23
SAFETY OPERATION
It is the operator’s responsibility to ensure
that other workers or bystanders are kept
away from the path of discharged chips.
Be prepared in case of an accident. Always
have a rst aid kit and re extinguisher handy
on the job site.
Never attempt to unclog the chipper or per-
form any other type of maintenance when the
chipper is running.
Before performing any maintenance on the
chipper, always turn off the engine and re-
move the ignition key.
Also, keep in mind that the chipper drum will
coast for several minutes after the machine is
shut off.
ALWAYS MAKE CERTAIN THE DRUM HAS
COME TO A COMPLETE STOP BEFORE
ATTEMPTING ANY MAINTENANCE.
Never open the chipper hood until you are
certain the drum has come to a complete
stop.
NEVER, UNDER ANY CIRCUMSTANCES,
RUN THE CHIPPER WHEN THE HOOD IS
OPEN.
Always use the drum lock pin to hold the
drum in place before performing any knife
maintenance.
To Next Page
Loading...