05/06
•
39
OPTIONAL REMOTE CONTROL
YOKE UP - Push and hold the toggle up to raise the infeed yoke.
WARNING: When the yoke up button is released, the yoke assembly will lower
to the infeed bed.
YOKE DOWN - Push the button to apply down pressure on the infeed yoke.
FEED FOWARD - Push toggle up to operate the feedworks foward.
FEED REVERSE - Push toggle down to reverse the feedworks.
ENGINE STOP - Push up and hold the toggle for three seconds. The power unit will
throttle to an idle, then shut down.
CAUTION: This button should only be used for emergency shut down.
STOP RESET - Push this toggle down after the engine stops.
NOTE: The engine will not re-start until this toggle is pushed down.
THROTTLE UP - Push the toggle up to increase engine RPM.
THROTTLE DOWN - Push the toggle down to decrease engine RPM.
1.
2.
3.
4.
432
1
To Next Page
Loading...