Morgana DIGIFOLD - Operating the Digifold: Accessing Menus

AccessingMenus.
MainMenu.
1.Themainsswitchonthemachinemustbeoff.
2.Setthetoitsmidpositionandthenturnthemainsswitchon.
3.Thefunctionscanthenbeaccessedbyturningthe
clockwiseoranti-clockwiseasshown.
Set-upSwitch
MainMenuSettingDial
CrEESon/oF=creaseonoroff
FoLdon/oF=foldonoroff
dELrYon/oF=deliveryonoroff
SEtPoS/FoLd=setbypositionorsetbyfold
bAt=batch
rG.00.00=rollergap
Sub-menus.
Set-upswitch
SettingDial
Toaccessthesub-menusflickthetothedownpositionandturnthe
clockwiseoranti-clockwise.
1Cr=creaseposition1
9Cr=creaseposition9
F1=fold1position
F2=fold2position
rPoS=deliveryrollerposition
Shin=shingle(amountdeliverywheelturns)
rESEt=reset
Sub-MenuinSetbymode(setbyposition).PoS
tYPEL=typeoffoldi.e.L=letterfold
Len100=paperlength
PAPEr3=typeofpaper(0=light3=heavy)
Cr10.0=crease1position
rPoS150=deliveryrollerposition
Shin41=shingle(amountdeliverywheelturns)
Cr20.0=crease2position
Sub-MenuinSetbymode(setbyfold)FoLd
F10.0=fold1position
F20.0=fold2position
Clockwise
Anti-clockwise
Clockwise
Anti-clockwise
Clockwise Anti-clockwise
OperatingtheDigifold
Page10
CREASING/FOLDING
F_cLron/oF=foldbladeclearofpapertoreducethepossibilityofmarkingor
scratchingsensitivepaper,onoroff