Morgana DIGIFOLD - Adjusting the blade pressure; Blade Pressure Adjustment; Adjusting the blade alignment; Blade Alignment Correction

Adjustingthebladepressure(nopaperrequired)
1.TurntheEmergencyStopbuttonclockwisetoswitchthemachine‘on’.
2.Activatethesystemswitchandthemotorswillbegintooperate.
3.Flickthe‘Feed’switchto‘on’andthenbackto‘off’toensurethatthelowerblade/
anvilisatitsbottomposition.
4.PressPushButton3,themachinewillautomaticallyswitchoffandthelowerblade/
anvilissettoitstoppositionwherethepressurecanbeadjusted.Raisetheexitguard.
5.Usinga6mmallenkey,unlocktheshoulderbolts(labelledwithscaletransfer)
positionedateachendofthecreasingblade.
6.Turntheadjustmentcamtoadjustthebladepressure.Increasingthegradientonthe
scalewillincreasethebladepressure.
7.Ensurethattheshoulderboltsarelockedaftersetting.
Thediagrambelowdemonstratestheadjustmentofbladepressure
Adjustingthebladealignment
Itisextremelyimportantthatthebladeandanvilassemblywithinthecreasingunitis
correctlyaligned.Misalignmentofthebladeoranvilcanleadtodamagedprofilesand
subsequentlypoorqualitycreasingsoitmust,therefore,becorrectedimmediately.
TheBladeAssembly
Page25SYSTEM
Digifold