Morgana DIGIFOLD - Page 13

13.RunthejobbyswitchingtheSystemandCompressorswitcheson,then
switchtheFeedswitchon.
14.Viewtheresults,the‘microadjust’functioncanbeusedtoadjustpositions.
15.To‘microadjust’thecreaseposition,turntheSettingDialclockwiseuntilCr1is
displayed.Thiswillbethecalculatedlengthofthecreaseposition.
PressandholdPB1andthedisplayshows0.0
To‘microadjust’,holddownPB1andturntheSettingDialtoadjustineitherdirection
ie+3.1mmto-3.1mmMax.
ReleasePB1.
16.To‘microadjust’thefoldposition,turntheSettingDialclockwiseuntilF1isdisplayed.
Thiswillbethecalculatedlengthofthefoldposition.
PressandholdPB1andthedisplayshows0.0
ToadjustholddownPB1andturntheSettingDialtoadjustineitherdirection
ie+3.1mmto-3.1mmMax.
ReleasePB1.
NOTES:-
Ifacreasepositionis‘microadjusted’,thefoldwillmovewithit.
Ifafoldpositionis‘microadjusted’,thenonlythefoldwillmove.
‘Microadjust’afoldonlyifthefoldappearstobegivinganoutofsquareresult
orcrackingappears.
Thefoldisprobablytooclosetothecenterofthecreaseandwillbetryingto
foldfromonesideofthecreasetotheoppositesideofthecrease(seepage14
forexplanation).
OperatingtheDigifold
Page13SYSTEM
Digifold