Mostek z80 - Page 12

1-2
AIM-Z8~AE is partitioned into three modules.
The Control and History
modules are .installed directly into the MOSTEK disk-based developnent
system. cables from these modules connect to the Buffer module which plugs
directly into the Target system Z8~ CPU socket.
After AIM-Z8~AE is
installed, the developnent systan is powered up and the systan booted up as
nonnal. All developnent system software and hardware is still functional.
AIM-Z8~AE systan software (AIMZ8~) may be initialized by using the implied
rtm conunand. AIMZ8~ will sign on, take control of the Target system and
allow the user to initialize the Target systan and use any of the
AIM-Z8~AE conunands to load, test and debug his Target program.