Mostek z80 - R-Display Registers Co~~~~D

3-38
Founat (3) is used to specify whether the heading will also be printed. If
operand "h" is "H" then the heading will be printed. Otherwise, the heading
will not be printed. Once the heading option is specified it remains set
until changed by the R corrunand.
The number of registers printed and the heading option apply to the register
printout which occurs after a breakpoint or when single stepping as well as
when the R corrunand is used.
3.58 EXAMPLES, R COMMAND
,~lCR) < display registers
PC AF I IF BC DE HL DISASSEMBLY
0003 0101 0041 FFFF FFFF 0200 INC A
,~ ",1 ,ND (CR)
< turn off disassembly
IX IY SP
BFFr' FFFF 01F0
PC AF I IF BC DE HL A'F' B'C' D'E' H'L' IX IY SP
0000 0101 0041 FFFF FFFF 0200 0040 0101 FFFF 30FF BFE'F FFFF 01F0 7 USEC
0002 0001 0041 FFFF FFFF 0200 0040 0101 FFFF 30FF BFFF FFFF 01F0 •
,R(CR) < display all registers
PC AF I IF Be DE HL A'F' B'C' D'E' H'L' IX IY SP
0002 0001 0041 FFn' FFFF 0200 0040 0101 F'FFF 30Fr' BFFF FFFF 0lF0
,R 6,0 (CR) < turn off heading
0002 0001 0041 FFFF FFFr' 0200
,~ 6,H(CR)
< turn on heading
PC AF I IF Be DE HL
0002 0001 0041 FFFF' FFFF 0200
,