26 Installation MoTeC
Software Installation
This section provides information on Dash Manager software, and i2 Data
Analysis software.
It will also explain how to connect the Display Logger to the PC.
PC Recommendations
MoTeC recommends a dedicated laptop for your race car with the following
specifications:
• Windows XP, Vista or Windows 7, Windows 8
• Screen size: 1024 x 768
• Processor speed: 1-2 GHz Pentium
• 2 GB RAM
• 256 MB graphics card
• 2 USB ports
• Ethernet port
Most current laptops will meet the specifications above and this will ensure all
MoTeC software will run on it.
C125 Dash Manager Software
C125 Dash Manager software is used for configuration, testing, retrieving the
logged data, and for general management of the Club Display Logger.
C125 Dash Manager supports configuration of the following connected
devices: E816, E888, SLM.
Installing Dash Manager Software
1. Go to the MoTeC website at www.motec.com and navigate to
software/latestreleases/C125 Dash Manager software
OR
Locate the Dash Manager software on the MoTeC Resource Disc
2. Save the selected file in your preferred location (for example desktop)
3. When downloading is finished, double click on the file and select run
4. Follow the instructions on the InstallShield Wizard
5. To start the program after installation, click the C125 Dash Manager
icon on the desktop or click Start > All Programs > MoTeC > C125 >
C125 Dash Manager
To Next Page
Loading...
Need help?
General