6 Introduction MoTeC
Introduction
C125 - Club Display Logger
The C125 is a sophisticated display and powerful control device combined in
one lightweight unit. With the addition of a Data Logging upgrade it becomes
a fully programmable data logger with 120 MB memory (see
Display Logger
Upgrades
). The screen layout is fully configurable to display a multitude of
data channels, warning alarms, lap times, fuel calculations, minimum corner
speeds, maximum straight speeds and more. The C125 performs
calculations, acquiring data from other devices such as an ECU, another
Display Logger and input expander modules, which enable it to log a
multitude of inputs.
Features
All MoTeC Display Loggers come with a range of features as standard and
several options available as upgrades to customise and grow the system.
These additional features are activated through a simple password system,
and can be purchased at any time when you need them.
See
Display Logger Upgrades.
General
• All-in-one display, logger and controller eliminates the need for separate
devices
• Suitable for bikes, cars, marine and industrial applications
• Compact, durable and reliable unit
• Supports Wideband Lambda from MoTeC PLMs or LTCs, using Bosch
LSU or NTK UEGO 5 wire sensors
• Straightforward control for lights, fans, pumps (optional)
• Easily integrated with MoTeC CAN based devices, e.g. Power
Distribution Modules, expanders, GPS, shift lights and ECUs
Logging and Analysis
• Optional internal data logging of 120 MB
• Fast download via Ethernet
• Data analysis with i2 Standard or optional i2 Pro software
• Accommodates over 300 channels derived from a mixture of analogue
and digital inputs, RS232 and CAN data channels
To Next Page
Loading...
Need help?
General