28 Installation MoTeC
If the Device is 'discovered' without the anti-virus software, you can turn it
back on and put in appropriate exceptions to allow the Display Logger
Manager to communicate with the device.
Only one connection can be active at a time. To switch to a different Display
Logger, click Make Active.
Tip: The current connection is listed at the bottom of the Dash Manager
splash screen (this is the main Dash Manager screen with the picture of the
Logger)
For a quick way to switch between connections
• In the Dash Manager splash screen, enter the connection number
(to enter the splash screen, close all other windows in Dash Manager).
To Next Page
Loading...
Need help?
General