50 Configuration MoTeC
Page Channels
Specifies the channels used to set page up, down and reset values.
Page up is the next page in numeric sequence, default channel is Display
Page Up Button.
Page down is the previous page in numeric sequence; default channel is
Display Page Down Button.
Page reset returns the display to the default page; default channel is Display
Page Reset Button.
Output Channels
This is used to select the output channel, which is the channel that controls
the page displayed; default channel is Display Page.
Note: For page control to function, this channel should be included in the
Display Creator Channels list so that it is included in the DBC file for import to
Display Creator.
For example, if the output channel value is 3 (that is page 3 is displayed), it is
increased to 4 via the Display Page Up Button channel and decreased to 2 via
the Display Page Down Button channel.
Options Tab
This tab is used to select whether a DBC file should be generated, and if so,
its filename.
If the DBC file is to be generated, specify a filename or select the default, The
default syntax is: [name of the configuration]-[display name].dbc.
To Next Page
Loading...
Need help?
General