Motic AE2000 - Default Chapter; Table of Contents

2
Content
I. Nomenclature 4
1. Application 4
2. Nomenclature 4
3. Technical data 7
II. Setting-up the Instrument 8
1. Working Environment 8
2. Input voltage and power 8
III. Assembling the Microscope Input Voltage 10
1. Installing the bulb 10
1.1 Halogen bulb 12
1.2 LED module 12
2. Filter Holder 13
3. Mounting the Condenser 13
4. Installing the Objectives 14
5. Mechanical Stage 14
6. Mounting the Eyepieces 15
IV. Microscopic Procedure 16
1. Interpupillary Distance Adjustment 16
2. Diopter Adjustment 16
3. Coarse and fine focusing 17
4. Coarse focus torque adjustment 17
5. Change the illumination between Halogen and LED 18
6. Brightfield Microscopy 19
7. Phase-Contrast Microscopy 19
8. Filter selection 21
9. Auto power off function 21
V. Photomicrographic Procedure (Model AE2000 trinocular) 23
1. Brightfield photomicrography 23