Function Description
Call Response Allows you to answer a private call.
Channel Up/Down Allows you to scroll up or down to other channels within the
current Zone.
Chanel Select Allows you to select a channel from the switch.
Channel Search Allows you to search for a channel.
Contacts Allows you to access the Contacts menu.
Dynamic Priority (Conventional
Only)
Allows any channel in a Scan List (except for a Priority-One
channel) to temporarily replace the Priority-Two channel.
Emergency Allows you to send or cancel Emergency Alarm to the dis-
patcher.
Fall Alert Clear Allows you to clear the Fall Alert mode alarm and exit Fall
Alert feature.
In-Call User Alert Allows the radio to remain muted to affiliated talkgroup calls
while operating on the current Trunking Personality or con-
ventional channel.
Light/Flip To turn on the display backlight on and off, press the button.
To flip the screen orientation of the top display, press and
hold the button.
Location Toggles the GPS/Location capabilities on and off.
Mode Select To change to the preset Mode Select zone and channel,
press the button.
To assign the current zone and channel to a programmable
button, press and hold the button.
Monitor (Conventional Only) Monitors a selected channel for all radio traffic until the func-
tion is disabled.
Nuisance Delete Temporarily removes an unwanted channel from scan list,
except for priority channels and the designated transmit
channel.
Private Call (Trunking Only) Allows you to dial the programmed ID (number) and initiate
the Private Call.
Priority Dispatch Allows you to call the dispatcher on a different talkgroup.
Radio Profiles Allows you to access a set of programmed visual and audio
settings of the radio.
Record Playback Allows you to saves and playback recorded calls.
Rekey Request Notifies the dispatcher that a new encryption key is needed.
Remote Monitor Enables the system administrator to remotely command a
targeted radio.
Repeater Access Button (RAB)
(Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking On-
ly)
Notifies the dispatcher that a new dynamic regrouping as-
signment is needed.
MN009207A01-AA
Chapter 2 : Radio Overview
24
To Next Page
Loading...
