4.2.2
User Login Feature
This feature allows you to take on a friendly username (Example: Text Messaging Service).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for LMR Messaging.
4.2.2.1
Logging In to Automatic Registration Service
Procedure:
1 From the Home screen, tap Shift Manager Launcher.
2 Tap User Login, then perform one of the following actions:
Option Actions
Log in with an existing ID Tap the ID.
Log in with a new ID
a Tap Login with new ID.
b Enter the User Login ID, then tap
Done.
3 Enter the authorized PIN, then tap Done.
If a PIN is not assigned to the ID, skip this step.
The display shows the Progress
screen. If the channel does not support Automatic Registration
Service login, the display shows the status as Offline.
4 While sign in is in progress, tap Hide.
After the login is completed, the Identity and Status Widget shows the login ID.
4.2.2.2
Logging Out of Automatic Registration Service
Procedure:
1 From the Home screen, tap Shift Manager Launcher.
2 Tap your ID, then tap Yes to confirm the request.
3 Perform one of the following actions:
• To clear the private data, tap Yes.
• To keep your private data, tap No.
4.2.3
Entering the Soft ID
Soft ID entry is only allowed if it is enabled and User Login is not used.
Procedure:
1 From the Home screen, tap Shift Manager Launcher.
MN009207A01-AA
Chapter 4 : Home Screen Overview
37
To Next Page
Loading...
Need help?
General
