18.4.1
Viewing Units/Devices
Procedure:
1 From the Home screen, tap the Location Widget.
2 Perform one of the following actions:
•
To view units/devices in Map view, tap the desired unit/device icon then tap the address.
• To view units/devices in List view, tap the desired unit/device then tap the address.
3 To zoom, perform one of the following actions:
• Tap on + or - zoom to adjust zoom levels.
• Double tap anywhere on the map to zoom in.
• Double tap anywhere on the map and drag your finger up or down in order to zoom in or out
granularly until finger is lifted or set back to initial position.
4 To view the device details of a unit, tap the name or icon of the device.
While in Map View, a blue circle will appear behind the Unit dialog box, representing real
location confidence range.
NOTE: Adjusting zoom levels will change size of graphical radius and indicate exact
distance on map.
5 For further details, tap the dialog box to open the Device details window.
While in the Device details menu, perform one of the following actions:
•
To view the location of the device on the map, tap
View on Map.
•
To view the contact information of the selected device, tap
Contact Detail.
Depending on whether the contact is saved in your radio, the radio opens the Dialer feature with
or without the contact information.
NOTE: All saved contacts are provisioned through the RadioCentral or Customer
Programming Software (CPS).
18.4.2
Creating Waypoints in Map View
Prerequisites: To create a Waypoint, enable Waypoints from the filter by tapping
More.
NOTE: Ensure that you save all the changes.
Procedure:
1 From the Home screen, tap the Location Widget.
2 From the Map view, long press a location on the map.
3 Tap Add Waypoint.
4 Select required name, then tap Done.
MN009207A01-AA
Chapter 18 : Location
76
To Next Page
Loading...
