Motorola solutions APX N70 - Exiting Fall Alert; Reinitiating Fall Alert

The radio plays an alert tone and the display shows Fall Alert Detected.
Postrequisites: If Fall Alert is configured but the condition does not trigger the activation of the
feature, send the radio to a qualified technician.
12.3
Exiting Fall Alert
Procedure:
To exit Fall Alert mode, tap Cancel.
12.4
Reinitiating Fall Alert
Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
•
Return the radio to a vertical position.
• If motion sensitivity is enabled, shake the radio.
MN009207A01-AA
Chapter 12 : Man Down (Fall Alert)
61