Chapter 7
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be preprogrammed to use this feature. At least one zone in the radio
must be a non-dynamic zone.
7.1
Selecting Channels in the Dynamic Zone
Procedure:
1 From the menu, enter a dynamic zone by performing one of the following actions:
Option Actions
Slide the ABC Programmable Switch to
the required position.
a From the Home screen, tap the Radio
Control Widget.
b Select the required zone followed by the
required channel.
2 From the Home screen, tap Zone Prgm→<Blank>.
3 Select the required zone followed by the required channel.
The display shows a positive notice and the channel is added to the Dynamic Zone.
7.2
Deleting Channels in the Dynamic Zone
Procedure:
To delete a channel, tap <Required channel>→Delete channel.
The message shows Deleted from position #. If the deleted channel is the home channel, the
Home screen shows <Zone Name>”Blank”.
MN009207A01-AA
Chapter 7 : Dynamic Zone Programming
48
To Next Page
Loading...
