Chapter 6
Zone and Channel Selection
This chapter explains the operations to select a zone or channel on your radio. A zone is a group of
channels.
6.1
Selecting Zones
Procedure:
1 Use one of the following methods to select a zone.
Option Actions
ABC switch
Slide the ABC switch to the required posi-
tion.
Home screen
a From the Home screen, tap the Radio
Control Widget.
b Perform one of the following actions:
a Select Current Zone <Zone Name>,
then select the required zone followed
by the required channel.
NOTE: If the default or
last known channel is con-
figured on the radio, it au-
tomatically highlights that
channel for easier selection.
b Select Recents followed by one of
the recently used zones and chan-
nels.
6.2
Selecting Zones from Zone Banks
A Zone Bank consists of three zones. The Basic Zone Bank feature supports two zone banks and a
total of six zones. The zones are indicated by the "A" to "F" icons. The Enhanced Zone Bank feature
supports 25 zone banks, which are indicated by the "A" to "Y" icons.
Procedure:
1 To change zone banks, perform one of the following actions:
•
To change Basic Zone Banks, press the preprogrammed Basic Zone Bank button.
• To change Enhanced Zone Banks, press the preprogrammed Enhanced Zone Bank Up or
Enhanced Zone Bank Down button.
NOTE: For the Enhanced Zone Bank feature, you can press and hold the
preprogrammed Zone Bank Up or Zone Bank Down button for faster scrolling.
One of the following scenarios occur:
MN009207A01-AA
Chapter
6 : Zone and Channel Selection
46
To Next Page
Loading...
Need help?
General
