AP-51xx Access Point Product Reference Guide8-150
AP51xx>admin(system.aap-setup)>set
Description:
Sets access point’s Adaptive AP configuration.
Syntax:
For information on configuring adaptive AP using the applet (GUI), see Adaptive AP Setup on page 4-6.
For an overview of adaptive AP functionality and its implications, see Adaptive AP on page 10-1.
set auto-discovery Sets the switch auto-discovery mode (enable/disable).
interface Defines the tunnel interface.
ipadr Defines the switch IP address used.
name Defines the switch name for DNS lookups.
port Sets the port.
passphrase Defines the pass phrase or key for switch connection.
tunnel-to-switch Enables/disables the tunnel between switch and access point.
ac-keepalive Defines the keepalive interval.
To Next Page
Loading...
