36
Common Radio Features
• Using the Feature
1. Telephone Calls Only — Your radio may be programmed to automatically
access the telephone system (immediate access/auto access) or wait for
you to do something (manual access/delayed access); consult your service
technician to determine which way your radio was programmed.
• Immediate Access:
The display will show “PLEASE WAIT”
while your radio attempts to access the
telephone system.
If the access was successful, you will hear
a dial tone, and the display will again
show the last number dialed.
• Auto Access (Conventional Channels
Only):
The display will show “PLEASE WAIT”
while your radio attempts to access the
telephone system via a radio-to-landline
phone patch.
• Manual Access (Conventional Channels
Only):
Enter a special telephone system access
code using the keypad to access the
telephone system via a radio-to-landline
phone patch.
• Delayed Access:
Enter a new phone
number or ID number
using any of the numeric
(0–9) keys; then press
the PTT Switch (see
following notes).
If the display shows “NO PHONE” or you do not hear a dial tone in any
of the above situations, “hang up” (disconnect) by pressing or the
designated quick-access button (Phone, Private Call, Selective Call, or
Call Alert Button).
If the display shows “PHONE BUSY,” your call is placed in queue until a
line is available.
1
4GHI
7PRS 8TUV
0
2
ABC
5JKL
3DEF
6MNO
9WXY
1
4GHI
7PRS 8TUV
0
2
ABC
5JKL
3DEF
6MNO
9WXY
Common Radio Features Page 36 Wednesday, April 10, 1996 12:32 PM
To Next Page
Loading...
Need help?
General
