Digital Cosmo
TM
Portable Radio
Quick-Reference Card
Write in your
radio’s programmed features.
GENERAL
Turning the Radio On
: Rotating the
On/Off/
Volume Control Knob
clockwise.
Monitoring (Conventional Channels Only):
Momentarily press the
Monitor Button
and listen
for voice activity.
Transmitting:
Press and hold the
PTT Switch
.
Receiving:
Release the
PTT Switch
.
Selecting a Zone and Channel:
1. Press until the softkey appears.
2. Press directly below .
3a. Press until the desired zone name appears.
OR
3b. Enter the number of the desired zone.
If the displayed zone/channel combination is
acceptable:
4. Press or the
PTT Switch
.
If you would like a different channel:
4a. Press until the
softkey
appears.
5. Press directly
below .
6a. Press until the
desired channel name
appears.
OR
6b. Enter the number of
the desired channel.
7. Press or the
PTT Switch
.
COMMON RADIO FEATURE
Making an Individual Call:
1a. Press until one
of the following
softkeys appears:
for Telephone Call
for a Private-Conversation Call
for a Call-Alert Page
2. Press directly below the desired softkey.
3a. If you wish to call the last number dialed,
press the
PTT Switch
.
3b. Press or until you locate the
member’s number you wish to call.
3c. Enter the number that corresponds to that
member’s placement within the list and press
the
PTT Switch
.
3d. Enter a new number and press the
PTT
Switch
.
16-Position
Select Knob
On/Off/Volume
Control Knob
Top Button
A/B Switch
Display
Arrow, Home,
To Next Page
Loading...
