COMMON and
SPECIAL RADIO FEATURES
Most of your radio features can be accessed by
performing the following steps (for more detail,
refer to the feature description in your manual).
1a. Press until
the desired
softkey appears
(see softkey list
below).
2. Press
directly below
the desired
softkey.
3. In most cases, the display will change to show
the current state of the feature and the
available softkey choices.
4a. If you want to change the feature state, press
directly below the desired softkey choice.
OR
4b. If you do not want to change the feature state,
press or the
PTT Switch
.
HOME
OR
1b. Press (or rotate)
the
Feature
Button/Switch
(if
programmed, see
front of card); this
takes your directly
to step 3.
Softkey Feature List
Softkey Feature
Individual Private-Conversation
Call or Selection Call
Channel Selection
Bypass Repeater (Talkaround) and
Talk Directly to Another Radio
Erasure (Zeroization) of
Encryption Key(s)
Radio Lock (Log Off)
Encyption Key(s) Index Grouping
Message-List Selection
Keypad Tones Muting
Call-Alert Page
Telephone Call
List Programming of Individual-
Call Numbers and Scan Channels
Program New Password
TX Power-Level Selection
New Dynamic-Regrouping Request
Scan Operation
Multiple Site Selection
Status-List Selection
List Viewing
Zone Selection
Softkey Feature
FOLD
FOLD
QR Page 2 Wednesday, April 10, 1996 12:57 PM
To Previous Page
Loading...
