D
RA
F
T
15
Getting Started
Notes:
•
When you charge the battery, the battery level
indicator blinks and the phone displays
Charging
.
•
Charging stops if you place or receive a call. However,
if the battery isn’t sufficiently charged, the keypad will
not function. The phone operates only if the battery is
charged enough to use the keypad.
•
If you charge the battery for 30 minutes but it does not
have enough power to operate the phone, the battery
no longer works and must be replaced.
Action
1
Turn the phone on (by pressing and holding
O
)
before you begin to charge the battery.
Note:
If the battery is completely discharged, the
phone may not turn on. If this happens, turn the
phone on after you connect the adapter.
2
Plug the travel charger into the appropriate
electrical outlet.
3
Plug the other end of
the travel charger into
your phone, as shown.
Note:
If the battery is
not installed properly,
the phone displays
Charging Impossible
.
4
When your phone indicates that it is fully charged
(
Charge Completed
), remove the charger.
To Next Page
Loading...
Need help?
General
