32 - Learning to Use Your Phone
Note: This chart may not reflect the exact character set available
on your phone. If you use the
Tap English entry method, keys 2
through
9 only display the basic characters. In an email
address or URL editor,
1 shows the common characters for
that editor first.
Tap Method Text Entry Rules
• Press a number key repeatedly to cycle through its characters.
See the chart on page 31.
• If you do not press a key for 2 seconds, the character in the
block cursor is accepted, and the cursor moves to the next
position.
• Press
S left or right to move the flashing cursor to the left or
right in a text message.
• The first character of every sentence is capitalised. Press
S
down to force the character to lowercase while it is highlighted
by the block cursor.
• Your phone may support multiple languages. The current
language setting determines whether a new message begins
on the left or right side of the display.
• If you enter or edit information and do not want to save the
changes, press
O to exit without saving.
Using the iTAP™ Method
iTAP™ software provides a predictive text entry method that lets
you enter a word using one key press per letter. This can be faster
than the
Tap Method, because your phone combines the key presses
into common words.
UG.C550.GSM.book Page 32 Wednesday, November 12, 2003 11:06 AM
To Next Page
Loading...
Need help?
General
