iv DS3508 Product Reference Guide
Revision History
Changes to the original manual are listed below:
Change Date Description
-01 Rev A 09/2009 Initial release.
-02 Rev A 11/2009 Update:
- Presentation Mode Field of View’ bar codes
- Supported baud rates for RS232.
-03 Rev A 02/2010 Add UID.
Update DPM information.
-04 Rev A 04/2010 Remove reference to Synapse (not supported); remove Regulatory information
as the complete Regulatory requirements appear in the Quick Start Guide;
update IEC definition in Glossary.
-05 Rev A 03/2011 Add: Decode Pager Motor Duration, Fuzzy 1D Processing, PDF Prioritization,
Prioritization Timeout, Mobile Phone/Display Mode, CDC USB Com Port
Emulation, Cute, PDF417, Data Matrix, QR Codes, Aztec/Aztec Rune, Micro
PDF, Maxicode, Polling Interval, Quick Emulation, OCR, Coupon Report, Korean
3 of 5, Australian Post Format, Databar Limited Security Level.
Update: Nixdorf Mode A and B columns, Inverse 1D defaults, Inverse Data Matrix
defaults.
Remove: Matrix 2 of 5 Redundancy.
-06 Rev A 2/2012 Add DS3508-ER configuration parameters: Trigger Modes, Torch Mode, Smart
LED Mode, Focus Modes. Add DS3508-ER decode zones and technical
specifications.
-07 Rev A 3/2012 Add notes to indicate that the DS3508-ER and DS3508-DP do not support
Multicode Mode, and that the DS3508-ER does not support imaging preferences.
-08 Rev A 4/2012 Add voltage and current specification for the DS3508-ER.
To Next Page
Loading...
Need help?
General
