4 - 18 DS3508 Product Reference Guide
Time Delay to Presentation Sleep Mode
Parameter # F1 96h
In presentation mode, this parameter sets the time the digital scanner remains active before entering sleep mode
with no illumination. The digital scanner wakes when it senses motion, upon presentation of a bar code, or a trigger
pull.
NOTE Digital scanner performance is not guaranteed in dim conditions.
Disable
(00h)
1 Second
(01h)
10 Seconds
(0Ah)
1 Minute
(11h)
5 Minutes
(15h)
NOTE Hands-free (presentation) scanning does not apply to the DS3508-ER configuration.
To Next Page
Loading...
