User Preferences & Miscellaneous Digital Scanner Options 4 - 21
Time Delay to Low Power Mode
Parameter # 92h
This parameter sets the time the digital scanner remains active before entering lower power mode (after the
applicable activity mode - see Digital Scanner Activity Modes on page 4-15). The digital scanner wakes upon
trigger pull or when the host attempts to communicate with the digital scanner.
NOTE This parameter only applies when Low Power Mode is enabled.
1 Second
(11h)
10 Seconds
(1Ah)
1 Minute
(21h)
5 Minutes
(25h)
15 Minutes
(2Bh)
To Next Page
Loading...
