Photos and Videos 6 - 3
• On - Location stored with photo.
•
White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the
most natural-looking colors.
• Auto - Adjust the white balance automatically (default).
• Incandescent - Adjust the white balance for incandescent lighting.
• Daylight - Adjust the white balance for daylight.
• Fluorescent - Adjust the white balance for florescent lighting.
• Cloudy - Adjust the white balance for a cloudy environment.
•
Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a
flash is necessary, or to turn it on or off for all shots.
• Auto - Camera adjusts flash automatically depending upon light meter.
• On - Enable flash upon taking photo.
• Torch - Turn on flash.
• Off - Disable flash (default).
•
Zoom - Touch to zoom from 1x to 8x.
•
Select camera - Touch to select the camera to use:
• Back - Rear facing camera (default).
• Front - Front facing camera.
Front-facing Camera
•
Settings - Touch to open a scrolling list of settings:
• Scene mode - Touch to select a preset combination of camera settings designed for specific scenes.
Options: Auto (default), Night and Night portrait.
• Photo size - Touch to set the size (in pixels) of the photo. Options: VGA (default) or QVGA.
• Picture quality - Touch to set the quality of the photo. Options: Super fine (default), Fine or Normal.
• Color effect - Touch to select special effects. Options: None (default), Mono, or Negative.
• Camera settings - Touch Restore defaults to restore all camera settings to the default values.
•
Store location - Include location information with each photo using the ET1 GPS.
• Off - Location not stored with photo (default).
• On - Location stored with photo.
To Next Page
Loading...
