Getting Started 1 - 9
Figure 1-7
Close Access Door
12. Align the tracks on the side of the replacement battery with the rails in the battery compartment.
13. Push the battery in until the battery release latch snaps into place.
14. Press the Power button to turn on the ET1.
Handstrap
Use the optional 360-degree rotatable handstrap to securely hold the ET1 while working. Refer to the ET1
Enterprise Tablet Integrator Guide for information on installing the handstrap.
Rotate the handstrap for landscape or portrait viewing.
Figure 1-8
Rotate Handstrap 360 Degrees
Insert hand into the handstrap and tighten strap.
To Next Page
Loading...
