2 - 6 MODEL INFORMATION & ACCESSORIES
1) Requires Junction Box, GMLN3002.
2) The cable, GMKN1022, is only compatible when an Data Expansion Head Enhanced is not fitted as part of a remote mount
configuration. In this configuration access to the Tetra PEI for IP Packet Data and SDS services is available on the Data
Expansion Head Enhanced and the Active Data Cable GMKN1022 is not required.
Junction Box Part Number M1 M2 M3 M4 M5
Junction Box GMLN3002_ X X X X X
Cable 6m Transceiver to Junction Box GMKN4192_ X X X X X
Cable 4m Transceiver to Junction Box GMKN4193_ X X X X X
Cable 2m Transceiver to Junction Box GMKN4194_ X X X X X
Power Cables (to Mobile Terminal) Part Number M1 M2 M3 M4 M5
12V Power Cable to Battery, 3m with Fuse (10A) GKN6270_ X X X X
12V Power Cable to Battery, 6m with Fuse (10A) GKN6274_ X X X X
Ignition Sense Cable, 3m with Fuse (4A) HKN9327_ X X X X
Installation Part Number M1 M2 M3 M4 M5
External Alarm Relay GKN6272_ X X X X X
Accessory Connector Kit GMBN1021_ X X X X X
Buzzer Kit GLN7282_ X X X X X
Mounting (Transceiver) Part Number M1 M2 M3 M4 M5
Key Lock Mount RLN4779_ X X X X X
High Profile Mounting Bracket GLN7317_ X X X X X
Low Profile Mounting Bracket GLN7324_ X X X X X
Mounting Frame to Install Transceiver in DIN-A Slot PMLN5094_ X X X X X
Mounting (Control Head) Part Number M1 M2 M3 M4 M5
Remote Mount Trunnion Kit PMLN4912_ X X
Motorcycle Mount Trunnion Kit PMLN5092_ X
DIN Mount Bracket PMLN5093_ X X
Programming/Data Part Number M1 M2 M3 M4 M5
USB Programming Cable (Terminal Rear Port) 3071810M01 X X X X X
Programming Cable GMKN4067_ X X X X X
Active Data Cable GMKN1022_ X X X X X
USB Programming Cable (Mobile) Microphone Port) HKN6184_ X X X X X
I85S USB Data Cable with Inline Power NNTN4007_ X X X X X
Dual Control Head Cables Part Number M1 M2 M3 M4 M5
Dual NGCH Cable Assy PMKN4078_ X X X X X
Dual NGCH Slave Cable PMKN4080_ X X X X X
Power Cable 3086026B02 PMKN4081_ X X X X X
Dual NGCH Cable Assy PMKN4092_ X X X X X
ACCESSORIES
To Next Page
Loading...
Need help?
General
