TEST SETUP & TESTING 5 - 1
CHAPTER 5
TEST SETUP & TESTING
Section Introduction
This Chapter contains the following Sections:
5.1 Test Setup & Testing for 380–430 MHz & 410–470 MHz
Any level 3 repairs can deeply affect the performance of the MTM800 with
Enhanced Control Head terminal and may cause a new tuning procedure.
This tuning procedure can only be applied by certain authorized Motorola
depots where the appropriate TEST&TUNE EQUIPMENT is available.
The appropriate TEST&TUNE EQUIPMENT is a special automated test
equipment which is only available at some Motorola factories and Motorola
repair centers.
!
W A R N I N G
!
To Next Page
Loading...
