A modification changes the hardware of the unit from its original design configuration. Only the original
product manufacturer can modify the hardware.
WARNING:
• Do not operate radio communications equipment in a hazardous atmosphere unless it is a
type especially qualified (such as FM, UL, CSA, CENELEC, or ATEX/IECEx approved). An
explosion or fire may result.
• Do not operate a radio unit that has been approved as intrinsically safe product in a
hazardous atmosphere if it has been physically damaged (for example, cracked housing).
An explosion or fire may result.
• Do not replace or charge batteries in a hazardous atmosphere. Contact sparking may occur
while installing or removing batteries and cause an explosion or fire.
• Do not replace or change accessories in a hazardous atmosphere. Contact sparking may
occur while installing or removing accessories and cause an explosion or fire.
• Turn off the radio before removing or installing a battery or accessory.
• Do not disassemble an intrinsically safe product in any way that exposes the internal circuits
of the unit.
• Failure to use an intrinsically safe approved battery or approved accessories for the radio
unit may result in the dangerously unsafe condition of an unapproved radio combination
being used in a hazardous location.
• Unauthorized or incorrect modification of the intrinsically safe approved product negates the
approval rating of the product.
• Incorrect repair or relabeling of any intrinsically safe agency-approved radio could adversely
affect the approval rating of the unit.
• Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious
injury or death.
Repair
A repair constitutes something done internally to the unit that would bring it back to its original
condition.
Repairs for Motorola Solutions products with intrinsically safe approval are the responsibility of the
user. Repairs to a Motorola Solutions FM approved radio product should only be done at a location that
has been FM audited under the FM 3605 repairs and service standard. Contact Motorola Solutions for
assistance regarding repairs and service of Motorola Solutions intrinsically safe equipment.
Items not considered as repairs are items in which an action is performed on a unit which does not
require the outer casing of the unit to be opened in a manner which exposes the internal electrical
circuits of the unit.
ATEX/IECEx Repairs
ED 50010
Global repair process and responsibilities
ED 50011
Repair checklist
ED 50013
ATEX/IECEx list of approved components/assemblies
This radio is certified to the ATEX/IECEx requirements. Radios need to be repaired in Motorola
Solutions certified/compliant repaired centers. Repair is conducted to the requirements of IEC60079-19
standard.
MN002465A01-AN
Legal and Compliance Statements
12
To Next Page
Loading...
Need help?
General
