Motorola Q Series User Manual

18
essentials
4 Choose either a simple password (4-digit
number) or strong numeric (a
hard-to-guess numeric PIN) password
type.
5 Enter and confirm your password. Press
the
ALT key ( ) to switch to numeric
mode.
Note: When you choose a password, it can
only be a numeric value.
6 Press Done .
To unlock the phone, press
Unlock . When the
unlock screen displays, enter your password
and press
Done .
Tip: Be certain to remember your password .
Without your password, you can reset your
phone, but it will result in the loss of your
personalized settings and all content stored in
phone memory. To perform a hard reset, hold
down the center select key (s) for 5 seconds
while turning the phone on.
Note: You can make emergency calls on a
locked phone (see page 72). A locked phone
still rings or vibrates for incoming calls or
messages, but you
do not need to unlock it to
answer a call.
security auto phone lock
To enable an automatic phone lock so that
your phone automatically locks after a
specified time, use auto phone lock.
Find it: Start > Settings > More... > Security > Device
Lock > Prompt if device unused for
and select the
number of minutes

Motorola Q Series Specifications

General

Brand	Motorola
Model	Q Series
Category	Cell Phone
Language	English