3 Select Security→DMSCK Validity.
The radio displays:
• DMSCK is Valid – The radio can work encrypted in DMO.
• DMSCK is Invalid – The radio cannot work encrypted in DMO. Please contact your
service provider to restore SCKs to your radio.
4.11.5.3
Viewing the Status of DMO SCK
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→DMO SCK.
The screen displays the status of the DMO Static Cipher Key.
4.12
Setup
The Setup menu allows you to change the general configuration on your radio.
4.12.1
Vibrate
This sub-menu allows you to determine if your radio vibrates, or rings, or vibrates and then rings when
receiving a call.
NOTICE: The vibration when pressing the capacitive Touch User Interface, known as Haptic
Feedback, is enabled by default and not controlled by this menu.
4.12.1.1
Setting Default Vibrate
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup→Vibrate.
3 Select one of the following options:
• Vibe then Ring
• Vibe Only
• Ring Only
4.12.2
Location
NOTICE: This is a Software Selling Feature.
This sub-menu allows you to enable the GNSS.
See Global Navigation Satellite System (GNSS) Global Positioning System (GPS) Location Service on
page 121.
MN004519A01-AK
Chapter 4: Main Menu
104
To Next Page
Loading...
